Romania Earthquake Statistics

by Emre ALAN v1.0 RO
INFP ROMPLUS catalogue1900 – 28.02.2026Mw ≥ 3.043.5–48.3° N · 20–30° E
Earthquakes– 
Largest– 
Observation period– 
Mw ≥ 5.0– 

Epicentre distribution

< 44–5 5–6≥ 6Dashed lines: county (județ) borders · Natural Earth

Time – magnitude

Each line is one earthquake. Early records contain only the larger events, so the catalogue is incomplete for those years.

Depth distribution

Earthquake list

MwMoment magnitudeDepthFocal depth (km)Dist.Distance to centre (km)UTCOrigin time

Probabilistic seismic hazard analysis

Emre ALAN

About this program

  1. The data come from the ROMPLUS earthquake catalogue, the official catalogue of earthquakes recorded on Romanian territory, published by the National Institute for Earth Physics of Romania (INFP, Măgurele) (infp.ro). The program performs probabilistic seismic hazard analysis from earthquakes of the instrumental period.
  2. Prepared by Emre ALAN, geophysical engineer and civil engineer, and made available to our colleagues.
  3. The program uses earthquakes with a moment magnitude (Mw) between 1900 and 28.02.2026, in the area between 43.5–48.3° north latitude and 20–30° east longitude, which covers Romania. Only earthquakes with a magnitude of Mw 3.0 or greater are used.
  4. Romanian seismicity occurs at two distinct depth levels, so the catalogue is split in two and each part is analysed separately: shallow (crustal) earthquakes with focal depth 0–60 km, and deep (intermediate-depth) earthquakes deeper than 60 km, which come almost entirely from the Vrancea zone.
  5. Taking the selected city or latitude-longitude as the centre, the program lists the earthquakes inside a circular area of 100 km radius (200 km diameter). Seismic hazard and risk are therefore always calculated for a selected city or latitude-longitude point.
  6. Using the listed earthquakes, seismic hazard and risk are calculated with the least-squares method (Gutenberg-Richter relation, Poisson occurrence model).
  7. This program was written for simple engineering applications, with no commercial purpose. Its results do not replace detailed, site-specific seismic hazard studies.
  8. For comments, suggestions, questions and criticism: emre@alanmuhendislik.com